How to Download and Flash Micromax Bharat 5 Pro Stock ROM

If you are looking for a way to download and flash the stock firmware on your Micromax Bharat 5 Pro, then you have come to the right place. In this article, we will show you how to install the official stock ROM on your device using a simple tool called QGDP. But before we get into the details, let’s find out what is Micromax Bharat 5 Pro and why flash it.

Introduction: What is Micromax Bharat 5 Pro and why flash it?

Micromax Bharat 5 Pro is a budget smartphone that was launched in March 2018. It features a 5.2-inch IPS LCD display with a resolution of 720 x 1280 pixels, a MediaTek MT6737 chipset with a quad-core CPU and a Mali-T720 GPU, 3 GB of RAM, 32 GB of internal storage, a microSD card slot, a 13 MP rear camera, a 5 MP front camera, a fingerprint sensor, a dual-SIM slot, a microUSB port, a FM radio, a Wi-Fi hotspot, a Bluetooth 4.0, a GPS, and a massive 5000 mAh battery. It runs on Android 7.0 Nougat operating system out of the box.

Flashing or installing stock ROM on your Micromax Bharat 5 Pro means replacing the current software or firmware on your device with the official one provided by the manufacturer. There are many reasons why you might want to flash your device, such as:

To unbrick your device if it is stuck in a bootloop, dead, or not responding.
To upgrade or downgrade your device’s Android version.
To fix OTA update issues or errors.
To fix bugs or glitches on your device.
To improve the performance or battery life of your device.
To restore the warranty or original settings of your device.

Benefits of flashing Micromax Bharat 5 Pro Stock ROM

Flashing your Micromax Bharat 5 Pro with the stock ROM has many benefits, such as:

It can fix any software issues or errors that you might be facing on your device, such as bootloop, lag, freeze, crash, etc.
It can restore the original settings and features of your device, such as the camera, sound, network, etc.
It can update your device to the latest Android version and security patches available for your device.
It can improve the performance and battery life of your device by removing any unwanted apps or bloatware that might be slowing down your device.
It can restore the warranty of your device if it was voided due to rooting or installing custom ROMs or mods.

Risks of flashing Micromax Bharat 5 Pro

Flashing your Micromax Bharat 5 Pro with the stock ROM also has some risks, such as:

It can erase all your data and settings on your device, including your contacts, messages, photos, videos, apps, etc. Therefore, it is highly recommended that you backup your data before flashing your device.
It can brick your device if you flash the wrong firmware file or interrupt the flashing process. Therefore, it is highly advised that you follow the instructions carefully and use a compatible firmware file for your device model and version.
It can void the warranty of your device if it is still valid. Therefore, it is suggested that you flash your device only if you are sure about what you are doing and accept the consequences.

Requirements for Flashing Micromax Bharat 5 Pro

To flash your Micromax Bharat 5 Pro with the stock ROM, you will need the following things:

A Windows PC or laptop with an internet connection.
A USB cable to connect your device to your PC.
A fully charged battery on your device or at least 50% of battery power.
A backup of your data and settings on your device or an external storage device.
An ADB driver installed on your PC. This is a software that allows your PC to communicate with your device. You can download and install it from here.
A QGDP tool downloaded and extracted on your PC. This is a software that allows you to flash CPB files on your device. You can download it from here.
A Micromax Bharat 5 Pro stock ROM downloaded and extracted on your PC. This is a firmware file that contains the official software for your device. You can download it from here.

Steps to Flash Micromax Bharat 5 Pro

Once you have all the requirements ready, you can follow these steps to flash your Micromax Bharat 5 Pro with the stock ROM:

Step 1: Backup your data

The first and most important step is to backup your data and settings on your device before flashing it. This is because flashing will erase everything on your device and you might lose some important files or information. You can backup your data using any of these methods:

Using Google account: You can sync your contacts, calendar, photos, etc. with your Google account and restore them later after flashing. To do this, go to Settings > Accounts > Google and enable the sync options for the data you want to backup.
Using external storage: You can copy your files, such as music, videos, documents, etc. to an external storage device, such as a memory card or a USB drive. To do this, connect your device to your PC using a USB cable and enable file transfer mode. Then, open the file explorer on your PC and copy the files from your device to the external storage.
Using third-party apps: You can use some third-party apps, such as Titanium Backup or Helium Backup, to backup your apps and app data on your device. To do this, download and install the app from the Google Play Store and follow the instructions on the app to backup your data.

Step 2: Turn off your device

The next step is to turn off your device and enter download mode. This is a special mode that allows you to flash firmware files on your device. To do this, follow these steps:

Press and hold the Power button on your device until a menu tool and wait for the progress bar to reach 100%. This may take several minutes depending on the size of the firmware file and the speed of your connection.
Do not disconnect your device or interrupt the flashing process until it is finished. This may cause your device to brick or malfunction.
Once the flashing process is completed, you will see a green Passed message on the screen. This means you have successfully flashed your device with the stock ROM.

Step 6: Reboot your device

The final step is to reboot your device and check if everything is working fine. To do this, follow these steps:

Disconnect your device from your PC and press and hold the Power button until your device restarts.
Wait for your device to boot up and complete the initial setup process.
Check if your device is functioning properly and if there are any issues or errors.
Restore your data and settings from your backup if you have one.
Enjoy your newly flashed Micromax Bharat 5 Pro with the stock ROM.

Troubleshooting Tips for Flashing Micromax Bharat 5 Pro

If you encounter any problems or errors while flashing your Micromax Bharat 5 Pro with the stock ROM, you can try these troubleshooting tips to fix them:

Tip 1: Check USB connection

If your device is not detected by your PC or the QGDP tool, you can check the USB connection between your device and PC. To do this, you can try these solutions:

Use a different USB cable or port to connect your device to your PC.
Enable USB debugging mode on your device by going to Settings > Developer options > USB debugging. If you don’t see Developer options, go to Settings > About phone and tap on Build number seven times to enable it.
Install or update the ADB driver on your PC from here.
Restart your device and PC and try again.

Tip 2: Check battery level

If your device shuts down or reboots during the flashing process, you can check the battery level of your device. To do this, you can try these solutions:

Charge your device fully or at least 50% before flashing it.
Use a good quality charger and cable to charge your device.
Avoid using your device while charging it.
Replace the battery if it is damaged or old.

Tip 3: Check firmware compatibility

If your device gets stuck in a bootloop or shows errors after flashing it, you can check the firmware compatibility of your device. To do this, you can try these solutions:

Download the firmware file that matches your device model and version from here.
Check the file name and size of the firmware file and make sure it is not corrupted or incomplete.
Extract the firmware file using a tool like WinRAR or 7-Zip and make sure it has a CPB extension.
Use the latest version of QGDP tool to flash the firmware file on your device.

Conclusion

In this article, we have shown you how to download and flash Micromax Bharat 5 Pro stock ROM using QGDP tool. We have also provided you with some benefits, risks, requirements, steps, and troubleshooting tips for flashing your device. We hope this article was helpful and informative for you. If you have any questions or feedback, please feel free to leave a comment below. Thank you for reading!

Frequently Asked Questions

What is stock ROM?

Stock ROM is the official software or firmware that comes pre-installed on your device by the manufacturer. It contains the operating system, apps, features, settings, etc. that are designed for your specific device model and version.

What is QGDP tool?

QGDP tool is a software that allows you to flash CPB files on Android devices that use Spreadtrum or MediaTek chipsets. It is a simple and easy-to-use tool that can help you install stock ROM on your device.

What is CPB file?

CPB file is a firmware file that contains the software for Android devices that use Spreadtrum or MediaTek chipsets. It has a CPB extension and can be flashed using QGDP tool.

How to backup data on Micromax Bharat 5 Pro?

You can backup your data on Micromax Bharat 5 Pro using any of these methods:

Using Google account: You can sync your contacts, calendar, photos, etc. with your Google account and restore them later after flashing. To do this, go to Settings > Accounts > Google and enable the sync options for the data you want to backup.
Using external storage: You can copy your files, such as music, videos, documents, etc. to an external storage device, such as a memory card or a USB drive. To do this, connect your device to your PC using a USB cable and enable file transfer mode. Then, open the file explorer on your PC and copy the files from your device to the external storage.
Using third-party apps: You can use some third-party apps, such as Titanium Backup or Helium Backup, to backup your apps and app data on your device. To do this, download and install the app from the Google Play Store and follow the instructions on the app to backup your data.

How to root Micromax Bharat 5 Pro?

Rooting is the process of gaining full access or control over your device’s system and features. It allows you to customize your device, install custom ROMs or mods, remove bloatware, etc. However, rooting also has some risks, such as voiding the warranty, bricking the device, exposing it to malware, etc. Therefore, you should root your device only if you know what you are doing and accept the consequences. To root your Micromax Bharat 5 Pro, you can follow these steps:

Download and install KingoRoot app from here on your device.
Open the app and tap on One Click Root.
Wait for the app to root your device and show a success message.
Reboot your device and check if you have root access by installing Root Checker app from here.

How to unroot Micromax Bharat 5 Pro?

Unrooting is the process of removing root access or control from your device’s system and features. It allows you to restore the original settings and features of your device, such as the warranty, OTA updates, security patches, etc. To unroot your Micromax Bharat 5 Pro, you can follow these steps:

Download and install SuperSU app from here on your device.
Open the app and tap on Settings.
Scroll down and tap on Full unroot.
Confirm your choice and wait for the app to unroot your device.
Reboot your device and check if you have unrooted it by installing Root Checker app from here.

bc1a9a207d

Micromax Bharat 5 Pro Flash File =LINK= Download 🤟🏾